SKU: XL-RV-FAN

RV Caravan Fan 360° – 3 Speed, Black – 12V/24V

$163.78 Inc. GST

The new XLOAD fan features a unique gimbaled design that allows 360° airflow with versatile 12/24 Volt auto-sensing capability. It’s perfect for motorhome and RV owners because of its low voltage power draw and strong breeze. Living in a vehicle, as some of us already know can get stuffy, making it hard to get comfortable. Feeling nervous about cutting holes in your roof to install a vent? Then the XLOAD is for you. We know it’s all too common to get stuck inside in the rain for a few days, which makes cracking a window impossible. Escape the humidity or use it to disperse smoke from cooking! With the improved control layout, increased timer settings and quieter operation the XLOAD fan is the perfect choice for caravanning in comfort.

This fan can be folded flat against the wall when you are not using it, taking up minimal space. It has multiple speeds, 4 pre-set timed settings and operates with minimal noise. There are so many benefits to having a timed fan. With the XLOAD fan, fall asleep in comfort without worrying about it being left on all night.

Features:

  • Gimbaled design
  • 12/24 Volt Auto-sensing capability
  • Improved switch control layout
  • Three Speeds
  • Four preset timer settings (3/6/9 or 12 hours)
  • Ultra quiet long-life motor with low power draw
  • Space friendly design
  • Made in China
  • 2 Year Warranty
  • PLEASE NOTE: Item does not come with 12v plug but comes with short cables for hard wire mounting.

Benefits:

  • Complete 360° directional airflow
  • Easy access
  • Controlled performance
  • Ultra quiet comfort that is also battery friendly
  • Allows the fan to be folded flat against the wall when not in use
  • Easy to install

Specifications:

  • Product Size (mm): 90(L) x 241(W) x 305(H)
  • Product Weight: 0.750kg
  • 12v = 0.14A, 0.26A, 0.42A
  • 24v = 0.11A, 0.18A, 0.25A

IMPORTANT:

  • Improper installation will void warranty. Please note these fans are a hardware item and it is recommended they be installed by a qualified installer.
  • Installation advice and requirements:
  • Carefully check that the Positive and Negative nut is firm
  • Install the Positive and Negative eyelets with the additional supplied brass nuts & lock washer careful not to over tighten.
  • Route cabling carefully either through the notches or base plate.
  • Please refer to supplied install manual before installing, removing the existing nuts will void warranty.

Warranty & Returns

Any products thought to be faulty can be returned to Trailer Spare Parts Australia for investigation at the customer’s expense. We reserve the right to determine whether the item/s are faulty or have been incorrectly used or mistreated. We are happy to accept any unwanted stock within 7 days of invoice. Returned items must be in “as new” condition for resale. Any specially ordered axles (IRS, Overlay and Drop Axles) are not returnable. Trailer Spare Parts Australia charges a re-stocking fee of 15% to any authorized returns, plus freight if the goods returned are not subject to warranty.

If the goods are subject to warranty, Trailer Spare Parts Australia will replace the goods and pay all freight inbound and outbound under our terms and conditions. All products sold by Trailer Spare Parts Australia carry a 12 months warranty under our terms and conditions.
Recommendations for these terms can be found on each product page, except for disposable parts (bearings, brake pads, etc).

Ask a Question

Axle Length Calculator

Holden / Ford / Parallel

  1. CW – Measure the width of your trailer body.
  2. BS – Measure the offset of the rims being used “with tyre fitted”.
  3. TC – 50mm Gap used on calculator as Standard.

 

Dexter

  1. CW – Measure the width of your trailer body.
  2. BS – Measure the offset of the rims being used “with tyre fitted”.
  3. TC – 40mm Gap used on calculator as Standard.

 

Determine the Rim Stud Pattern

Rim Stud Pattern

stud patterns on your trailer

IMPORTANT: The lines highlighted in yellow are the products we supply.

Wheel Type Stud Diameter Stud Number Inches PCD MM PCD Centre to Centre of Adjacent Studs Centre to Centre of Adjacent Studs
Gemini 7/16" 4 100.00 2 13/16" 70.7
Mini 7/16" 4 4" 101.60 2 13/16" 71.84
Capri 7/16" 4 4 1/4" 107.95 3" 76.33
Cortina/Telstar 7/16" 4 4 1/4" 107.95 3" 76.33
Datsun 1600 7/16" 4 4 1/2" 114.30 3 3/16" 80.82
Early Ford 1/2" 4 4 1/2" 114.30 3 3/16" 80.82
Toyota Corona 7/16" 4 4 1/2" 114.30 3 3/16" 80.82
Valiant to 71 7/16" 5 4" 101.60 2 3/9" 59.72
Holden HT HG HK 7/16" 5 4 1/4" 107.95 2 1/2" 63.45
Ford 1/2" 5 4 1/2" 114.30 2 5/8" 67.18
Valiant 71 - 72 7/16" 5 4 1/2" 114.30 2 5/8" 67.18
Commodore 7/16" 5 120.00 2.776" 70.53
Holden HQ HJ HX 7/16" 5 4 3/4" 120.65 2 13/16" 70.91
Ford F100 1/2" 5 5 1/2" 139.70 3 1/4" 82.11
Ford-Jeep 1.2" 5 5 1/2" 139.70 3 1/4" 82.11
Land Rover 5/8" 5 6 1/2" 165.10 3 13/16" 96.98
Land Cruiser 100 Series 9/16" 5 150.00 88.17
Land Cruiser 4WD 1/2" 6 5 1/2" 139.70 2 3/4" 69.85
Nissan Patrol 1/2" 6 5 1/2" 139.70 2 3/4" 69.85
Nissan Navara D40 1/2" 6 114.30

Ask a question about this product