SKU: BJTJ-1001

BLACK JACK Electric Trailer Jack MAXI with Clamp & Harness Kit

$657.43 Inc. GST

Out of stock

BLACK JACK Electric Trailer Jack with Clamp & Harness Kit

Gone are the days of manually winding the jockey wheel to raise or lower the caravan or trailer.

The new generation of electric trailer jack technology. The Black Jack Maxi is a quantum leap in technology and represents the new generation of Black Jacks. Incorporating an Intelli-Brake motor that automatically cuts power to the jack at either fully retracted or fully extended. Remote control operation allows for easier hitching and unhitching and makes levelling your caravan a breeze. The new Black Jack Maxi boasts a ball bearing worm drive that is twice as efficient, faster and quieter, and generates a massive lift capacity of 2,000kg. All Black Jack Maxi’s come with a Pre-installed Anderson plug for easy “Plug and Play” connection. The kit includes-

  • The new Black Jack Maxi
  • Patented Black Jack Clamp with full bolt kit
  • Folding Foot and Adjustable Foot
  • All Weather Cover
  • Black Jack Soft Ground Foot Pad
  • Manual Handle
  • An installation wiring harness is also included with BJTJ-Maxi-1001. This harness includes a pre-wired Andersen plug at one end, a 30amp inline fuse, and battery terminals at the other end. The 5 meters of positive and negative B&S # 8 wires are encased in a protective cover.
BLACK JACK Maxi Key Features
  • 2,000 kg lifting capacity
  • Auto power cut-off at full extension and full retraction
  • Included remote-control for hands-free operation
  • Robust 58 mm outer post built for the toughest conditions (normal jockey wheels are only 48mm)
  • Massive 450 mm stroke that will lift the caravan clear of the tow vehicle hitch in any conditions
  • Built in level indicator to easily adjust the caravan level after you unhitch
  • Tough powder coated finish
  • Pre-wired to an Andersen plug – length of cable is 1.4m
  • Emergency crank handle included as an emergency back up
  • Built in night light for operating after hours
  • 12 volt 28 amp DC power plugs directly to 12 volt battery
  • Free installation kit included, easy DIY Installation (with BJTJ-Maxi-1001)
  • Free all-weather cover to keep the rain out
  • Total weight including Black Jack Clamp 17 kg

 

 

 

 

 

 

Warranty & Returns

Any products thought to be faulty can be returned to Trailer Spare Parts Australia for investigation at the customer’s expense. We reserve the right to determine whether the item/s are faulty or have been incorrectly used or mistreated. We are happy to accept any unwanted stock within 7 days of invoice. Returned items must be in “as new” condition for resale. Any specially ordered axles (IRS, Overlay and Drop Axles) are not returnable. Trailer Spare Parts Australia charges a re-stocking fee of 15% to any authorized returns, plus freight if the goods returned are not subject to warranty.

If the goods are subject to warranty, Trailer Spare Parts Australia will replace the goods and pay all freight inbound and outbound under our terms and conditions. All products sold by Trailer Spare Parts Australia carry a 12 months warranty under our terms and conditions.
Recommendations for these terms can be found on each product page, except for disposable parts (bearings, brake pads, etc).

Ask a Question

Axle Length Calculator

Holden / Ford / Parallel

  1. CW – Measure the width of your trailer body.
  2. BS – Measure the offset of the rims being used “with tyre fitted”.
  3. TC – 50mm Gap used on calculator as Standard.

 

Dexter

  1. CW – Measure the width of your trailer body.
  2. BS – Measure the offset of the rims being used “with tyre fitted”.
  3. TC – 40mm Gap used on calculator as Standard.

 

Determine the Rim Stud Pattern

Rim Stud Pattern

stud patterns on your trailer

IMPORTANT: The lines highlighted in yellow are the products we supply.

Wheel Type Stud Diameter Stud Number Inches PCD MM PCD Centre to Centre of Adjacent Studs Centre to Centre of Adjacent Studs
Gemini 7/16" 4 100.00 2 13/16" 70.7
Mini 7/16" 4 4" 101.60 2 13/16" 71.84
Capri 7/16" 4 4 1/4" 107.95 3" 76.33
Cortina/Telstar 7/16" 4 4 1/4" 107.95 3" 76.33
Datsun 1600 7/16" 4 4 1/2" 114.30 3 3/16" 80.82
Early Ford 1/2" 4 4 1/2" 114.30 3 3/16" 80.82
Toyota Corona 7/16" 4 4 1/2" 114.30 3 3/16" 80.82
Valiant to 71 7/16" 5 4" 101.60 2 3/9" 59.72
Holden HT HG HK 7/16" 5 4 1/4" 107.95 2 1/2" 63.45
Ford 1/2" 5 4 1/2" 114.30 2 5/8" 67.18
Valiant 71 - 72 7/16" 5 4 1/2" 114.30 2 5/8" 67.18
Commodore 7/16" 5 120.00 2.776" 70.53
Holden HQ HJ HX 7/16" 5 4 3/4" 120.65 2 13/16" 70.91
Ford F100 1/2" 5 5 1/2" 139.70 3 1/4" 82.11
Ford-Jeep 1.2" 5 5 1/2" 139.70 3 1/4" 82.11
Land Rover 5/8" 5 6 1/2" 165.10 3 13/16" 96.98
Land Cruiser 100 Series 9/16" 5 150.00 88.17
Land Cruiser 4WD 1/2" 6 5 1/2" 139.70 2 3/4" 69.85
Nissan Patrol 1/2" 6 5 1/2" 139.70 2 3/4" 69.85
Nissan Navara D40 1/2" 6 114.30

Ask a question about this product