SKU: BRKACT-IQ7

ALKO iQ7 Brake Actuator

$1,863.40 Inc. GST

1 in stock

Al-KO iQ7 Electric over Hydraulic Brake Actuator

 

USER MANUAL

The AL-KO iQ7 is the latest in power assisted braking, designed to significantly improve stopping performance and safety for trailers with hydraulic brakes, especially large boat trailers. It allows immediate brake application the instant it is required. And iQ7 includes inbuilt breakaway technology to stop your trailer if it becomes detached from the tow vehicle. No other parts are required.

In addition AL-KO iQ7 enables you to meet the legal requirement that all trailers with a loaded weight exceeding two tonnes (2.5 tonnes in New Zealand) must incorporate power assisted brake application. Until recently the most popular solution was to fit a vacuum or compressed air system to the tow vehicle, but not only is this very expensive it often also means that the warranty of the tow vehicle is voided. Fitting the AL-KO iQ7 system allows the legal use of hydraulic disc brakes for towed vehicles and trailers over 2 tonne in Australia and 2.5 tonne in New Zealand, and also provides superior stopping performance. The bottom line is you’ll enjoy superior safety and peace of mind while knowing AL-KO iQ7 has been designed and manufactured in Australia for Australian conditions, backed by AL-KO’s global expertise in towing safety.

 

When an emergency braking situation occurs, the common downfall of some earlier electro-hydraulic brake actuators was time-lag or delayed response time. This is due to the delay in receiving a signal from the controller and the time taken for the electric drive motor to pump enough fluid to activate the master cylinder. AL-KO has addressed this, not only through its advanced XTREME electronic controller but, by utilising a compressed air reservoir to provide instant activation of the hydraulic master cylinder. This has resulted in an unparalleled response time. Only AL-KO iQ7 stores compressed air within a pressure chamber, allowing immediate brake application the instant it is required.

AL-KO iQ7 has been equipped with the latest superior computer processor circuit technology for maximum reliability. AL-KO has also completed over 220,000 cycle tests on iQ7. This level of testing simulates the equivalent of setting off on an average of 42 trips per year over 10 years, without iQ7 experiencing any problems. This re-enforces the quality and reliability of the technology. To complete the offer of complete peace of mind, AL-KO provides a market leading 3 year warranty (When installed by an Authorised AL-KO iQ7 Installer).

Warranty & Returns

Any products thought to be faulty can be returned to Trailer Spare Parts Australia for investigation at the customer’s expense. We reserve the right to determine whether the item/s are faulty or have been incorrectly used or mistreated. We are happy to accept any unwanted stock within 7 days of invoice. Returned items must be in “as new” condition for resale. Any specially ordered axles (IRS, Overlay and Drop Axles) are not returnable. Trailer Spare Parts Australia charges a re-stocking fee of 15% to any authorized returns, plus freight if the goods returned are not subject to warranty.

If the goods are subject to warranty, Trailer Spare Parts Australia will replace the goods and pay all freight inbound and outbound under our terms and conditions. All products sold by Trailer Spare Parts Australia carry a 12 months warranty under our terms and conditions.
Recommendations for these terms can be found on each product page, except for disposable parts (bearings, brake pads, etc).

Ask a Question

Axle Length Calculator

Holden / Ford / Parallel

  1. CW – Measure the width of your trailer body.
  2. BS – Measure the offset of the rims being used “with tyre fitted”.
  3. TC – 50mm Gap used on calculator as Standard.

 

Dexter

  1. CW – Measure the width of your trailer body.
  2. BS – Measure the offset of the rims being used “with tyre fitted”.
  3. TC – 40mm Gap used on calculator as Standard.

 

Determine the Rim Stud Pattern

Rim Stud Pattern

stud patterns on your trailer

IMPORTANT: The lines highlighted in yellow are the products we supply.

Wheel Type Stud Diameter Stud Number Inches PCD MM PCD Centre to Centre of Adjacent Studs Centre to Centre of Adjacent Studs
Gemini 7/16" 4 100.00 2 13/16" 70.7
Mini 7/16" 4 4" 101.60 2 13/16" 71.84
Capri 7/16" 4 4 1/4" 107.95 3" 76.33
Cortina/Telstar 7/16" 4 4 1/4" 107.95 3" 76.33
Datsun 1600 7/16" 4 4 1/2" 114.30 3 3/16" 80.82
Early Ford 1/2" 4 4 1/2" 114.30 3 3/16" 80.82
Toyota Corona 7/16" 4 4 1/2" 114.30 3 3/16" 80.82
Valiant to 71 7/16" 5 4" 101.60 2 3/9" 59.72
Holden HT HG HK 7/16" 5 4 1/4" 107.95 2 1/2" 63.45
Ford 1/2" 5 4 1/2" 114.30 2 5/8" 67.18
Valiant 71 - 72 7/16" 5 4 1/2" 114.30 2 5/8" 67.18
Commodore 7/16" 5 120.00 2.776" 70.53
Holden HQ HJ HX 7/16" 5 4 3/4" 120.65 2 13/16" 70.91
Ford F100 1/2" 5 5 1/2" 139.70 3 1/4" 82.11
Ford-Jeep 1.2" 5 5 1/2" 139.70 3 1/4" 82.11
Land Rover 5/8" 5 6 1/2" 165.10 3 13/16" 96.98
Land Cruiser 100 Series 9/16" 5 150.00 88.17
Land Cruiser 4WD 1/2" 6 5 1/2" 139.70 2 3/4" 69.85
Nissan Patrol 1/2" 6 5 1/2" 139.70 2 3/4" 69.85
Nissan Navara D40 1/2" 6 114.30

Ask a question about this product