$57.42 Inc. GST
*ONE SPRING ONLY*
These Slipper Springs are a very simple and durable option for boat trailer or to use a setup that offers good town and highway driving. We offer these springs in Dacromet Coat for weather/sea proof and black painted springs as a standard product. They also come in two different leaf thickness 6mm and 8mm the same principle applies to both, however the 8mm takes a higher load rating. The standard ½” eye on the front of the spring is attached using the Hanger which is welded to the chassis rails and uses ½” 3.5” High Tensile Bolt to secure the spring to the Hanger.
‘Slipper’ refers to the end of the spring that rests upon the rear hanger that is welded to the chassis and absorbs the impact going through the trailer. All though not recommended by us many trailers come with tandem or even slipper spring setups, it is quite a low cost alternative for the reason that it doesn’t share the load evenly across trailer. It is a common problem for one side of the trailer to lift shifting all the weight to one side causing it to damage the springs. So for that reason on tandem trailers:
Therefore if you’re planning on driving off-road or on rough roads we recommended you move to a Shackle Springs or a Rocker Roller Springs.
Any products thought to be faulty can be returned to Trailer Spare Parts Australia for investigation at the customer’s expense. We reserve the right to determine whether the item/s are faulty or have been incorrectly used or mistreated. We are happy to accept any unwanted stock within 7 days of invoice. Returned items must be in “as new” condition for resale. Any specially ordered axles (IRS, Overlay and Drop Axles) are not returnable. Trailer Spare Parts Australia charges a re-stocking fee of 15% to any authorized returns, plus freight if the goods returned are not subject to warranty.
If the goods are subject to warranty, Trailer Spare Parts Australia will replace the goods and pay all freight inbound and outbound under our terms and conditions. All products sold by Trailer Spare Parts Australia carry a 12 months warranty under our terms and conditions.
Recommendations for these terms can be found on each product page, except for disposable parts (bearings, brake pads, etc).
Pay online, over the phone, in store or via bank transfer.
We offer multiple shipping options.
We have over 13 years of trade experience.
IMPORTANT: The lines highlighted in yellow are the products we supply.
| Wheel Type | Stud Diameter | Stud Number | Inches PCD | MM PCD | Centre to Centre of Adjacent Studs | Centre to Centre of Adjacent Studs |
|---|---|---|---|---|---|---|
| Gemini | 7/16" | 4 | 100.00 | 2 13/16" | 70.7 | |
| Mini | 7/16" | 4 | 4" | 101.60 | 2 13/16" | 71.84 |
| Capri | 7/16" | 4 | 4 1/4" | 107.95 | 3" | 76.33 |
| Cortina/Telstar | 7/16" | 4 | 4 1/4" | 107.95 | 3" | 76.33 |
| Datsun 1600 | 7/16" | 4 | 4 1/2" | 114.30 | 3 3/16" | 80.82 |
| Early Ford | 1/2" | 4 | 4 1/2" | 114.30 | 3 3/16" | 80.82 |
| Toyota Corona | 7/16" | 4 | 4 1/2" | 114.30 | 3 3/16" | 80.82 |
| Valiant to 71 | 7/16" | 5 | 4" | 101.60 | 2 3/9" | 59.72 |
| Holden HT HG HK | 7/16" | 5 | 4 1/4" | 107.95 | 2 1/2" | 63.45 |
| Ford | 1/2" | 5 | 4 1/2" | 114.30 | 2 5/8" | 67.18 |
| Valiant 71 - 72 | 7/16" | 5 | 4 1/2" | 114.30 | 2 5/8" | 67.18 |
| Commodore | 7/16" | 5 | 120.00 | 2.776" | 70.53 | |
| Holden HQ HJ HX | 7/16" | 5 | 4 3/4" | 120.65 | 2 13/16" | 70.91 |
| Ford F100 | 1/2" | 5 | 5 1/2" | 139.70 | 3 1/4" | 82.11 |
| Ford-Jeep | 1.2" | 5 | 5 1/2" | 139.70 | 3 1/4" | 82.11 |
| Land Rover | 5/8" | 5 | 6 1/2" | 165.10 | 3 13/16" | 96.98 |
| Land Cruiser 100 Series | 9/16" | 5 | 150.00 | 88.17 | ||
| Land Cruiser 4WD | 1/2" | 6 | 5 1/2" | 139.70 | 2 3/4" | 69.85 |
| Nissan Patrol | 1/2" | 6 | 5 1/2" | 139.70 | 2 3/4" | 69.85 |
| Nissan Navara D40 | 1/2" | 6 | 114.30 |
Get 10% off all (non-discounted) products online. Use coupon code CHECKOUT10 during checkout.