Trailer Parts Brisbane Sydney Melbourne

4L Rhinogrip Etch Primer – Wagon Paints

SKU: WP-PRIMEG

$88.44 Inc. GST

Product Description

Single-pack epoxy-modified adhesion-promoting etch primer maximising adhesion to steel fabrications, galvanized steel and aluminium. Comes in grey and white colours in matt. At 25ºC, touch dry in 5-10 minutes, hard dry in 45 minutes and recoating after 1 hour and before 24 hours. Suitable Wagonpaint topcoats include Rapid Enamel, Purlenamel, Implement Enamel and Auto Enamel. May be used under 2K polyurethanes (e.g. Rhinothane®). Available in 1L, 4L and 20L pack sizes.

  • Excellent adhesion to most ferrous & non-ferrous metals
  • Intermediate coating to provide adhesion for topcoats over difficult substrates
  • Simple single-pack formula
  • Resists splashes of hydrocarbon solvents
  • Provides adhesion to galvanized steel, aluminium and Zincalume®
  • Maximises adhesion to steel fabrications

Warranty & Returns

Any products thought to be faulty can be returned to Trailer Spare Parts Australia for investigation at the customer’s expense. We reserve the right to determine whether the item/s are faulty or have been incorrectly used or mistreated. We are happy to accept any unwanted stock within 7 days of invoice. Returned items must be in “as new” condition for resale. Any specially ordered axles (IRS, Overlay and Drop Axles) are not returnable. Trailer Spare Parts Australia charges a re-stocking fee of 15% to any authorized returns, plus freight if the goods returned are not subject to warranty.

If the goods are subject to warranty, Trailer Spare Parts Australia will replace the goods and pay all freight inbound and outbound under our terms and conditions. All products sold by Trailer Spare Parts Australia carry a 12 months warranty under our terms and conditions.
Recommendations for these terms can be found on each product page, except for disposable parts (bearings, brake pads, etc).

Ask a Question

Axle Length Calculator

Holden / Ford / Parallel

  1. CW – Measure the width of your trailer body.
  2. BS – Measure the offset of the rims being used “with tyre fitted”.
  3. TC – 50mm Gap used on calculator as Standard.

 

Dexter

  1. CW – Measure the width of your trailer body.
  2. BS – Measure the offset of the rims being used “with tyre fitted”.
  3. TC – 40mm Gap used on calculator as Standard.

 

Determine the Rim Stud Pattern

Rim Stud Pattern

stud patterns on your trailer

IMPORTANT: The lines highlighted in yellow are the products we supply.

Wheel Type Stud Diameter Stud Number Inches PCD MM PCD Centre to Centre of Adjacent Studs Centre to Centre of Adjacent Studs
Gemini 7/16" 4 100.00 2 13/16" 70.7
Mini 7/16" 4 4" 101.60 2 13/16" 71.84
Capri 7/16" 4 4 1/4" 107.95 3" 76.33
Cortina/Telstar 7/16" 4 4 1/4" 107.95 3" 76.33
Datsun 1600 7/16" 4 4 1/2" 114.30 3 3/16" 80.82
Early Ford 1/2" 4 4 1/2" 114.30 3 3/16" 80.82
Toyota Corona 7/16" 4 4 1/2" 114.30 3 3/16" 80.82
Valiant to 71 7/16" 5 4" 101.60 2 3/9" 59.72
Holden HT HG HK 7/16" 5 4 1/4" 107.95 2 1/2" 63.45
Ford 1/2" 5 4 1/2" 114.30 2 5/8" 67.18
Valiant 71 - 72 7/16" 5 4 1/2" 114.30 2 5/8" 67.18
Commodore 7/16" 5 120.00 2.776" 70.53
Holden HQ HJ HX 7/16" 5 4 3/4" 120.65 2 13/16" 70.91
Ford F100 1/2" 5 5 1/2" 139.70 3 1/4" 82.11
Ford-Jeep 1.2" 5 5 1/2" 139.70 3 1/4" 82.11
Land Rover 5/8" 5 6 1/2" 165.10 3 13/16" 96.98
Land Cruiser 100 Series 9/16" 5 150.00 88.17
Land Cruiser 4WD 1/2" 6 5 1/2" 139.70 2 3/4" 69.85
Nissan Patrol 1/2" 6 5 1/2" 139.70 2 3/4" 69.85
Nissan Navara D40 1/2" 6 114.30

Ask a question about this product

A special offer just for you...

10% Off

CHECKOUT10

Get 10% off all (non-discounted) products online. Use coupon code CHECKOUT10 during checkout.