40mm Square Solid Trailer Axle – 1000kg Holden
MADE TO ORDER
Our Brisbane team machines each axle to order. Therefore, same-day collection or dispatch is not available.
Trailer Spare Parts Australia machines this 40mm square trailer axle in-house to suit your required length and Holden bearing configuration.
With a 1000kg axle rating, this model suits compatible box trailers and motorbike trailers. In addition, our in-house machining process allows us to prepare the axle to your required length.
| Axle profile | 40mm square solid |
| Axle rating | 1000kg |
| Bearing type | Holden |
| Inner bearing | LM67048 |
| Inner bearing dimensions | 59.10mm OD × 31.75mm ID |
| Outer bearing | LM11949 |
| Outer bearing dimensions | 45.20mm OD × 19.05mm ID |
| Axle length | Made to your required length |
01. Inspection
Our team inspects each steel axle beam before machining.
02. Machining
We machine the axle ends to suit the specified bearing configuration.
03. Quality Check
We check the machined ends to confirm the correct bearing fit.
Measure your axle tip to tip, as shown in the product diagram.
Also, confirm your required length and bearing configuration before ordering.
Important: All axles are made to order.
Please allow manufacturing time before collection or dispatch.
WE’RE HERE TO HELP
Can’t find the axle length or configuration you need? Our Brisbane team can help you choose the right axle for your trailer.
Any products thought to be faulty can be returned to Trailer Spare Parts Australia for investigation at the customer’s expense. We reserve the right to determine whether the item/s are faulty or have been incorrectly used or mistreated. We are happy to accept any unwanted stock within 14 days of delivery or collection. Returned items must be in “as new” condition for resale. Any specially ordered axles (IRS, Overlay and Drop Axles) are not returnable. Trailer Spare Parts Australia charges a re-stocking fee of 15% to any authorized returns, plus freight if the goods returned are not subject to warranty.
If the goods are subject to warranty, Trailer Spare Parts Australia will replace the goods and pay all freight inbound and outbound under our terms and conditions. All products sold by Trailer Spare Parts Australia carry a 12 months warranty under our terms and conditions.
Recommendations for these terms can be found on each product page, except for disposable parts (bearings, brake pads, etc).
IMPORTANT: The lines highlighted in yellow are the products we supply.
| Wheel Type | Stud Diameter | Stud Number | Inches PCD | MM PCD | Centre to Centre of Adjacent Studs | Centre to Centre of Adjacent Studs |
|---|---|---|---|---|---|---|
| Gemini | 7/16" | 4 | 100.00 | 2 13/16" | 70.7 | |
| Mini | 7/16" | 4 | 4" | 101.60 | 2 13/16" | 71.84 |
| Capri | 7/16" | 4 | 4 1/4" | 107.95 | 3" | 76.33 |
| Cortina/Telstar | 7/16" | 4 | 4 1/4" | 107.95 | 3" | 76.33 |
| Datsun 1600 | 7/16" | 4 | 4 1/2" | 114.30 | 3 3/16" | 80.82 |
| Early Ford | 1/2" | 4 | 4 1/2" | 114.30 | 3 3/16" | 80.82 |
| Toyota Corona | 7/16" | 4 | 4 1/2" | 114.30 | 3 3/16" | 80.82 |
| Valiant to 71 | 7/16" | 5 | 4" | 101.60 | 2 3/9" | 59.72 |
| Holden HT HG HK | 7/16" | 5 | 4 1/4" | 107.95 | 2 1/2" | 63.45 |
| Ford | 1/2" | 5 | 4 1/2" | 114.30 | 2 5/8" | 67.18 |
| Valiant 71 - 72 | 7/16" | 5 | 4 1/2" | 114.30 | 2 5/8" | 67.18 |
| Commodore | 7/16" | 5 | 120.00 | 2.776" | 70.53 | |
| Holden HQ HJ HX | 7/16" | 5 | 4 3/4" | 120.65 | 2 13/16" | 70.91 |
| Ford F100 | 1/2" | 5 | 5 1/2" | 139.70 | 3 1/4" | 82.11 |
| Ford-Jeep | 1.2" | 5 | 5 1/2" | 139.70 | 3 1/4" | 82.11 |
| Land Rover | 5/8" | 5 | 6 1/2" | 165.10 | 3 13/16" | 96.98 |
| Land Cruiser 100 Series | 9/16" | 5 | 150.00 | 88.17 | ||
| Land Cruiser 4WD | 1/2" | 6 | 5 1/2" | 139.70 | 2 3/4" | 69.85 |
| Nissan Patrol | 1/2" | 6 | 5 1/2" | 139.70 | 2 3/4" | 69.85 |
| Nissan Navara D40 | 1/2" | 6 | 114.30 |