Product Description
Description
This bundle contains the Elecbrake brake controller, Remote and a Plug & Play Adapter allowing the user to be up and running with compliant trailer brake within 10 minutes (no wiring required). The adapters connect to the brake controller via a IP68 rated connector. Allows compliance with ADR38/05.
Bundle Contents:
- ELBC2000-PS Brake controller
- EBR in-car remote control kit
- Adapter* (as selected)
*Elecbrakes provides adapters to suit the tow vehicle and trailer plug and socket combinations, prior to selecting your adapter you will need to confirm the variation installed on your vehicle and trailer (Flat 7, Flat 12, Large Round 7, Small Round 7) Note Elecbrake part number format is “vehicle plug – trailer plug”.
Elecbrakes is a full electric brake controller designed and assembled in Australia.
The system uses Bluetooth technology to provide a reliable wireless connection via the main controller box mounted on the trailer draw bar.
This uniquely designed unit is then wirelessly controlled by any smartphone with Bluetooth. Available on all phone platforms.
The Elecbrakes system is built and designed to conform to all Australian standards for caravans and trailers up to 4.5T ATM.
How Does it Work?
Unlike traditional brake controllers that are fitted to the tow vehicle, Elecbrakes mounts on the trailer utilizing a “Hybrid wireless” system (part Bluetooth 4.0 and part hard wired) to conform with ADR38 requirements. Being mounted on the trailer provides key advantages such as any suitably sized tow vehicle can tow the trailer, brake response is set and stored in the unit on the trailer.
Multiple power supply circuits reduce the load on any one circuit and provide redundancy for bad connectors or faulty circuits.
The device is fitted to the trailer’s draw bar and wired into the existing electrical circuits. You can then monitor, change settings and control the trailer’s brakes using the Elecbrakes smartphone app.
What installation option is right for me?
Trailer -Wired
The ‘Trailer-Wired’ model functions identically except it is spliced directly into your trailer’s wiring. This means that when you connect your trailer to your vehicle you simply plug the trailer cable into your tow vehicle’s socket as you would normally. This installation results in less external visible cables which provides a sleeker look. This option is popular with customers using an installer.
Plug & Play
For the quickest and easiest install choose the ‘Plug & Play’ model. The wiring in this model is pre-configured in an external adaptor which means all you need to do is affix it onto your trailer and simply plug in to your tow vehicle’s socket. This option is popular with customers who are installing the unit themselves.
Additional Information
| Plug and Play Adaptor | Car 12 Pin Flat to Trailer 12 Pin Flat, Car 7 Pin Flat – Trailer 12 Pin Flat, Car 7 Pin Flat – Trailer 7 Pin Flat, Car small round – Trailer 7 Pin Flat |
|---|
Any products thought to be faulty can be returned to Trailer Spare Parts Australia for investigation at the customer’s expense. We reserve the right to determine whether the item/s are faulty or have been incorrectly used or mistreated. We are happy to accept any unwanted stock within 7 days of invoice. Returned items must be in “as new” condition for resale. Any specially ordered axles (IRS, Overlay and Drop Axles) are not returnable. Trailer Spare Parts Australia charges a re-stocking fee of 15% to any authorized returns, plus freight if the goods returned are not subject to warranty.
If the goods are subject to warranty, Trailer Spare Parts Australia will replace the goods and pay all freight inbound and outbound under our terms and conditions. All products sold by Trailer Spare Parts Australia carry a 12 months warranty under our terms and conditions.
Recommendations for these terms can be found on each product page, except for disposable parts (bearings, brake pads, etc).
All refunds are made via Paypal.
